Password Recovery Procedure

for the Cisco 1020 Router

Description

This document describes how to recover a password on a Cisco 1020 router.

Since the Cisco 1020 router is often not physically secured, to perform a password recovery you must call Cisco Systems or your distribution channel and provide a Cisco 1020 router generated challenge. Using the override program, the support representative can provide a one-time password you can use to enter enable mode.

Notes:

• Overrides can be done only from the console.
• Press Return at the password prompt if the enable password is not set.

Step-by-Step Procedure

1. From the console, log in to the Cisco 1020 router with username enable and password override.

   The 1020 prints a challenge.

2. Provide the support representative with the challenge.

   The challenge is used to provide the response.

3. On the 1020 console, log in with username enable and use the response as the password.

   You're now in enable mode.

4. Type wr t to see the existing password or type conf t to change the password.
   说明：
   以上典型配置有很多已经是厂商停产产品，但是，不少设备往往还有运行，关于该设备的配置或者方案优化，你可以联系蓝盟，我们的资深工程师会给你意外的惊喜！上海蓝盟网络技术有限公司于2002年成立，业务涵盖IT外包、电脑维护、网络维护、网管外包、驻场服务、人员派驻、应急支持、系统集成、网络搬迁、网络升级、数据备份、综合布线、电脑维修、计算机维护、计算机维修，网络改造、网络整理、网络调试、局域网组建、 应急上门、数据恢复、网络咨询、服务管理、运维咨询、ITIL培训、ITSS咨询等，拥有近200名工程师，正在为近500家客户提供“一站式” 的IT外包服务。网址：www.lanmon.com www.lanmon.net 官方微博：http://weibo.com/lanmon2012 咨询电话：4008200159 蓝色学苑：www.bluestudy.net

• 上一篇: 蓝盟IT外包，元宇宙：四梁八柱是什么
  下一篇: 7000 (RP), AGS, IGS, STS-10x

• 分享到：