Password Recovery Procedure

for the Cisco Cache Engine 2050

Description

This document describes the administration password recovery procedure for the Cisco Cache Engine 2050.

Note: Your configuration is lost after performing this password recovery. It is not possible to keep your configuration when recovering a lost administrative password.

Step-by-Step Procedure

1. Establish a console connection to the Cisco Cache Engine and reload the device or type reboot at the command line. While the Cache Engine is rebooting, press any key to interrupt the low level configuration countdown.
2. Enter the basic configuration menu. Use:

• a dash (-) to go to the previous field
• the Enter key to go to the next field

1. Press Enter five times until the "Replace admin pw" field is displayed.
2. Enter the new administrative password and press Enter. The next field is "Repeat admin pw".
3. Enter the same password once again and press Enter.
4. At the prompt: "Is this basic configuration acceptable?", type "y" for yes.

Example of Password Recovery on a Cisco Cache Engine 2050

The following example shows password recovery on a Cisco Cache Engine 2050:

!-- The Cache Engine has just been rebooted --! 


Cisco Cache Engine hard disk bootstrap 
Version: 1.0 
Copyright (c) 1997 Cisco Systems, Inc. 
Creation date: Sep 10 1997, 16:51:59 



Loading system image...1209816 + 40080 + 74600836 
nTarget Name: vxTarget 
User: target 
Attaching network interface lo0... done. 
NFS client support not included. 
Loading symbol table from /ata0/vxWorks.sym ...done 

System restarted at 
GMT: FRI JUL 07 17:37:44 2000 

Basic configuration file is complete 
h 
Press any key to OVERRIDE basic low-level configuration... !--- From the moment this line appears, you have 10 seconds to press any key 5 
override selected... 


Use '-' to step back,to accept a non-blank value as given. 
You must accept or provide values for all configuration prompts. 

      Config Version [                     1]: 
          IP Address [          172.17.241.7]: 
          IP Netmask [         255.255.255.0]: 
     Default Gateway [          172.17.241.1]: 
    Wccp Home Router [         172.17.241.32]: 
    Replace admin pw [                      ]: cisco 
     Repeat admin pw [                      ]: cisco 
          Cache Name [               megaton]: 
          Group Name [                 cisco]: 
       GMT Date/Time [   2000/07/07 17:38:27]: 
     Config Register [            0x10000001]: 

Is this basic configuration acceptable ? (n,y) [n]: y Basic low-level configuration accepted. 
Attaching network interface fei0... done. 
Media bandwidth: 10 Mb/s half-duplex 

-> There are 15 partitions. 
Revision string is /ata0/1_7_5.dir 
Found a valid fargo.cfg. This must be a good version 
Starting message server. 
Waiting for message server. 
Started server on port 1024 
Message server started. 
Syslog host not configured. 
Started server on port 8001 
Started Stat Collector. 
DNS not configured. 
Static routes not configured 
Initializing Url Filtering 
Initialized Url Filtering - filtering disabled 
Starting WCCP on 172.17.241.32 
Started server on port 80 
Added 2000 threads to ready queue 

Browse to 172.17.241.7:8001 to manage this machine. 
Browse to 172.17.241.7:8001 to manage this machine. 
Browse to 172.17.241.7:8001 to manage this machine. 
Icp Initialized
	

		说明：
	

	

		以上典型配置有很多已经是厂商停产产品，但是，不少设备往往还有运行，关于该设备的配置或者方案优化，你可以联系蓝盟，我们的资深工程师会给你意外的惊喜！上海蓝盟网络技术有限公司于2002年成立，业务涵盖IT外包、电脑维护、网络维护、网管外包、驻场服务、人员派驻、应急支持、系统集成、网络搬迁、网络升级、数据备份、综合布线、电脑维修、计算机维护、计算机维修，网络改造、网络整理、网络调试、局域网组建、 应急上门、数据恢复、网络咨询、服务管理、运维咨询、ITIL培训、ITSS咨询等，拥有近200名工程师，正在为近500家客户提供“一站式” 的IT外包服务。网址：www.lanmon.com www.lanmon.net 官方微博：http://weibo.com/lanmon2012 咨询电话：4008200159 蓝色学苑：www.bluestudy.net 
	

• 上一篇: 蓝盟IT外包，元宇宙：四梁八柱是什么
  下一篇: Cisco 6000 MAFC口令恢复

• 分享到：