Cisco 交换机综合实例(三)

发布者:上海IT外包来源:http://www.lanmon.net点击数:3851

第三部分:

Catalyst 4003 的配置

下面给出Catalyst 4003 的配置清单

Enter password:  Console> enable Enter password:  Console> (enable) set system name 4003-ER-F1 System name set.
4003-ER-F1> (enable) set system location 1st Floor Equipment Room System location set.
4003-ER-F1> (enable) set system contact [email protected] System contact set.
4003-ER-F1> (enable) set time 04/30/1999 9:45:00 Fri Apr 30 1999, 09:45:00 
4003-ER-F1> (enable) set password Enter old password:  Enter new password:  Retype new password:  Password changed.
4003-ER-F1> (enable) set enablepass Enter old password:  Enter new password:  Retype new password:  Password changed.
4003-ER-F1> (enable) set banner motd % 4003-ER-F1 (Catalyst 4003) Access Restricted % MOTD banner set
4003-ER-F1> (enable) set interface sc0 10.10.1.20/24 Interface sc0 IP address set.
4003-ER-F1> (enable) set ip route default 10.10.1.1 Route added.
4003-ER-F1> (enable) set ip dns server 10.10.10.100 10.10.10.100 added to DNS server table as primary server.
4003-ER-F1> (enable) set ip dns domain bigcorp.com  Default DNS domain name set to bigcorp.com
4003-ER-F1> (enable) set ip dns enable DNS is enabled
4003-ER-F1> (enable) set vtp domain BigCorp mode client VTP domain BigCorp modified
4003-ER-F1> (enable) set module name 1 Supervisor Module name set.
4003-ER-F1> (enable) set module name 2 Gig Uplinks Module name set.
4003-ER-F1> (enable) set port flowcontrol 2/1-2 send off Ports 2/1-2 flow control send administration status set to off
(ports will not send flowcontrol to far end)
4003-ER-F1> (enable) set port flowcontrol 2/1-2 receive off Ports 2/1-2 flow control receive administration status set to off
(ports will not allow far end to send flowcontrol)
4003-ER-F1> (enable) set port negotiation 2/1-2 enable Ports 2/1-2 negotiation enabled
4003-ER-F1> (enable) set port name 2/1-2 GEC 802.1Q Trunk Ports 2/1-2 name set.
4003-ER-F1> (enable) set port channel 2/1-2 desirable Port(s) 2/1-2 channel mode set to desirable.
4003-ER-F1> (enable) set trunk 2/1 desirable dot1q Port(s) 2/1-2 trunk mode set to desirable.
Port(s) 2/1-2 trunk type set to dot1q.
4003-ER-F1> (enable) set module name 3 Gig Server Links Module name set.
4003-ER-F1> (enable) set port name 3/1-2 Corporate Server Ports 3/1-2 name set.
4003-ER-F1> (enable) set port name 3/3 DevEng Server Port 3/3 name set.
4003-ER-F1> (enable) set port name 3/4 QA Server Port 3/4 name set.
4003-ER-F1> (enable) set port flowcontrol 3/1-4 send desired Ports 3/1-4 flow control send administration status set to desired
(ports will send flowcontrol to far end if far end supports it)
4003-ER-F1> (enable) set port flowcontrol 3/1-4 receive desired Ports 3/1-4 flow control receive administration status set to desired
(ports will allow far end to send flowcontrol if far end supports it)
4003-ER-F1> (enable) set port channel 3/1-2 off Port(s) 3/1-2 channel mode set to off.
4003-ER-F1> (enable) set port channel 3/3-4 off Port(s) 3/3-4 channel mode set to off.
4003-ER-F1> (enable) set trunk 3/1-4 off Port(s) 3/1-4 trunk mode set to off.
4003-ER-F1> (enable) set spantree portfast 3/1-4 enable Warning: Spantree port fast start should only be enabled on ports connected
to a single host. Connecting hubs, concentrators, switches, bridges, etc. to
a fast start port can cause temporary spanning tree loops. Use with caution.
 
Spantree ports 3/1-4 fast start enabled.
4003-ER-F1> (enable) set vlan 10 3/1-2 VLAN 10 modified.
VLAN 1 modified.
VLAN  Mod/Ports
---- -----------------------
10    2/1-2
      3/1-2
      
4003-ER-F1> (enable) set vlan 20 3/3 VLAN 20 modified.
VLAN 1 modified.
VLAN  Mod/Ports
---- -----------------------
20    2/1-2
      3/3
      
4003-ER-F1> (enable) set vlan 40 3/4 VLAN 40 modified.
VLAN 1 modified.
VLAN  Mod/Ports
---- -----------------------
40    2/1-2
      3/4
      
4003-ER-F1> (enable)
下见第四部分
说明:
以上典型配置有很多已经是厂商停产产品,但是,不少设备往往还有运行,关于该设备的配置或者方案优化,你可以联系蓝盟,我们的资深工程师会给你意外的惊喜!上海蓝盟网络技术有限公司于2002年成立,业务涵盖IT外包、电脑维护、网络维护、网管外包、驻场服务、人员派驻、应急支持、系统集成、网络搬迁、网络升级、数据备份、综合布线、电脑维修、计算机维护、计算机维修,网络改造、网络整理、网络调试、局域网组建、 应急上门、数据恢复、网络咨询、服务管理、运维咨询、ITIL培训、ITSS咨询等,拥有近200名工程师,正在为近500家客户提供“一站式” 的IT外包服务。网址:www.lanmon.com www.lanmon.net 官方微博:http://weibo.com/lanmon2012 咨询电话:4008200159 蓝色学苑:www.bluestudy.net
IT外包
>
400-635-8089
立即
咨询
电话咨询
服务热线
400-635-8089
微信咨询
微信咨询
微信咨询
公众号
公众号
公众号
返回顶部