Password Recovery Procedure

for the Catalyst 5000 ATM LANE Module

Description

This document describes the password recovery procedure for the Cisco Catalyst 5000 ATM LAN emulation (LANE) module
(WS-X5153/5154/5155/5156/5157/5158/5166).

Step-by-Step Procedure

In order to recover a password, you must download a recovery image onto the ATM module that will erase the contents of nonvolatile RAM (NVRAM).

1. Before you start, make sure you have the ATM module recovery image and the original or latest ATM module image. To get this image, establish an FTP session to ftp.cisco.com and log in as c5k_atmp. Use your email address as the password. Enter the get atm_911.cbi command.
2. Download the ATM module recovery image on the Catalyst 5000 supervisor console by typing:

   download host atm_911.cbi atm mod_num

3. Wait for the module online message. At this time, the password is disabled and the NVRAM on the ATM module is erased. Reboot the Catalyst 5000.

If you wish to save your original configuration without the password, continue with step 4 below. Otherwise, to enter a new configuration, skip to step 5.

1. Enter the session ATM slot # command. Then, on the ATM module, type:

   enable (you will not be prompted for a password)

   write memory

   exit

   This will save your configuration, but without the enable password.

2. To enter a new configuration, download the original ATM image by typing:

   download filename

3. Once you receive the module online message, you may session to the ATM module and enable without a password.
   说明：
   以上典型配置有很多已经是厂商停产产品，但是，不少设备往往还有运行，关于该设备的配置或者方案优化，你可以联系蓝盟，我们的资深工程师会给你意外的惊喜！上海蓝盟网络技术有限公司于2002年成立，业务涵盖IT外包、电脑维护、网络维护、网管外包、驻场服务、人员派驻、应急支持、系统集成、网络搬迁、网络升级、数据备份、综合布线、电脑维修、计算机维护、计算机维修，网络改造、网络整理、网络调试、局域网组建、 应急上门、数据恢复、网络咨询、服务管理、运维咨询、ITIL培训、ITSS咨询等，拥有近200名工程师，正在为近500家客户提供“一站式” 的IT外包服务。网址：www.lanmon.com www.lanmon.net 官方微博：http://weibo.com/lanmon2012 咨询电话：4008200159 蓝色学苑：www.bluestudy.net

• 上一篇: 蓝盟IT外包，元宇宙：四梁八柱是什么
  下一篇: 在Rom monitor 状态升级2600路由器

• 分享到：